Thankful Pumpkin 3D Printed Freshie Housing

Thankful Pumpkin 3D Printed Freshie Mold Housing

What is it/How is it used:
• This is a 3D printed housing used to make your own freshie molds. You must purchase silicone to be able to use these to make your molds!

• Here's a quick how-to process on how to make your own molds:

1. Purchase your favorite brand of silicone. My personal favorite is BBDino clear.
2. Mix equal parts of silicone (for example: 1 cup of Part A & 1 cup of Part B).
3. You can use mica power or liquid dyes to color your silicone. My PERSONAL preference is mica powders. Please make sure you mix THOROUGHLY.
4. Pour your silicone mixture into the housings and let rest for at least 6-8 hours! This is crucial.
5. Once that time is up, you're ready to pull the molds and use them! (PRO TIP: invest in an air compressor! Use a basketball needle to stick down in between the edge of the silicone and the edge of the housings and blast away! This will lift the mold partially out and be easier to pull the mold out without tearing!!)

PLEASE NOTE: THESE ARE NOT SILICONE MOLDS!! THESE ARE 3D PRINTED HOUSINGS!!

PLEASE UNDERSTAND, IF YOU DID NOT READ THE DESCRIPTION ON THIS LISTING AND ORDERED THINKING THIS WAS A MOLD, THERE ARE ABSOLUTELY ZERO REFUNDS.

NO REFUNDS, NO EXCHANGES, ALL SALES ARE FINAL!

DUE TO THE NATURE OF THIS PRODUCT,  YOUR FINISHED PRODUCT MAY SHOW THE PATTERN OF THE TOP HATCHING OF THE HOUSING IN YOUR MOLD. THIS WILL NOT AFFECT YOUR MOLD IN ANY WAY! THIS IS UNAVOIDABLE DUE TO THE PROCESS OF 3D PRINTING.